 |
SPT OUTSOLE
USED ON IRONBRIDGE, GUNBY, 8845, 8855, 7A12 & 7A14
- PVC heat sealed welted sole
- Standard wooden shank
- Slip resistant. Exceeds 0.5 in dry and wet conditions and 0.25 in oily/wet conditions when tested with Mark II machine
- High degree of oil and abrasion resistance
- Energy absorbing heel strike area
- Aggressive cleated outsole tread pattern
|
|
 |
 |
SAF OUTSOLE
USED ON HARDWICK, EXCEPT HARDWICK IND, BOSWORTH, 2295, 2296, 0061, 0062, 0071, 0072, 7B09, 7B10, 7B11
- PVC heat sealed welted sole
- Standard wooden shank
- Slip resistant. Exceeds 0.5 in dry and wet conditions and 0.25
in oily/wet conditions when tested with Mark II machine
- High degree of oil and abrasion resistance
- Energy absorbing heel strike area
- Traditional work boot cleated outsole
|
|
 |
 |
HUD OUTSOLE
USED ON 8833, 8836, 8933, 8936
- PVC heat sealed welted soleStandard wooden shank
- Slip resistant. Exceeds 0.5 in dry and wet conditions and 0.25 in oily/wet conditions when tested with Mark II machine
- High degree of oil and abrasion resistance
- Energy absorbing heel strike area
- Aggressive cleated outsole tread pattern
- NoteOTE: Hardwick IND features standard steel midsole plate seated below the insole board on the HUD outsole
|
|
 |
 |
DGT OUTSOLE
USED ON HARD HAT
- PVC heat sealed welted sole
- Slip resistant. Exceeds 0.5 in dry and wet conditions and 0.25 in oily/wet conditions when tested with Mark II machine
- High degree of oil and abrasion resistance
- Energy absorbing heel strike area
|
|
 |
 |
FMS OUTSOLE
USED ON FLUX
- PVC heat sealed welted
- Standard wooden shank
- Slip resistant. Exceeds 0.5 in dry and wet conditions and 0.25
in oily/wet conditions when tested with Mark II machine
- High degree of oil and abrasion resistance
- Energy absorbing heel strike area
|
|
 |
 |
GNB OUTSOLE
USED ON PURSUIT AND GUNNER
- Nitrile rubber outsole combined with compression molded
EVA midsole
- Thermoplastic shank
- Slip resistant. Exceeds 0.5 in dry and wet conditions and 0.25
in oily/wet conditions when tested with Mark II machine
- High degree of oil and abrasion resistance
- Energy absorbing EVA forefoot and heel strike area
- Heavy cleated tread pattern
|
|
 |
 |
WKB OUTSOLE
USED ON WORKMAN AND SCANNER
- PVC outsole combined with cushioned polyurethane midsole
- Steel shank (on Workman only)
- Thermoplastic shank (on Scanner only)
- Slip resistant. Exceeds 0.5 in dry and wet conditions and 0.25in oily/wet conditions when tested with Mark II machine'
- High degree of oil and abrasion resistance
- Energy absorbing heel strike area
|
|
 |
 |
HTG OUTSOLE
USED ON GRIPTRAX
- Nitrile rubber outsole combined with cushioned
polyurethane midsole
- Steel shank
- Slip resistant. Exceeds 0.5 in dry and wet conditions and 0.25in oily/wet conditions when tested with Mark II machine
- High degree of oil and abrasion resistance
- Heat resistant to 300 degrees C.
- Energy absorbing heel strike area
|
|
 |
 |
FWB OUTSOLE
USED ON FREEDM SNEAK AND BUADO
- Nitrile rubber cupsole combined with die-cut EVA midsole
- Slip resistant.
- High degree of oil and abrasion resistance
|
|
 |